Heart of calcium carbide furnace-- Electrode paste

 　　In the equipment of calcium carbide furnace, the electrode is the "heart" of calcium carbide furnace. The quality of the electrode directly affects the production of calcium carbide. The electrode is baked by the calcium carbide producer with the electrode paste as the main raw material. The quality of the electrode paste and the operation level of the calcium carbide producer jointly affect the quality of the electrode.

　　The electrode plays the role of conducting current and converting electric energy into heat energy in the calcium carbide furnace. In the production of calcium carbide, the current is input into the furnace through the electrode to generate arc, which mainly uses the arc energy to release heat and produce calcium carbide products at high temperature. The production and operation effect of calcium carbide furnace directly depends on whether the electrode is in normal working state. If there are problems with the electrode, such as hard break, soft break, too short, too long, rupture, paste leakage, fire stabbing and other accidents, the normal production of calcium carbide will be affected.

　　Sometimes, the furnace will be shut down for several hours or even days, and in serious cases, personal accidents may occur, which will affect the human, material and environmental protection Financial resources are a great waste. Therefore, it is very important to understand and master the influence of the equipment on the electrode and the electrical parameters of the calcium carbide furnace on the working state of the electrode. Only by mastering these knowledge, can the electrode be used normally, reduce the electrode accident and reduce the economic loss. If we do not pay attention to the management of the electrode, it will lead to the electrode accident and cause unnecessary power failure, It brings adverse consequences to safety and normal production.

　　The quality of electrode paste directly affects the baking quality and use effect of electrode. Therefore, the managers of calcium carbide production put forward higher requirements for the quality of electrode paste used in closed calcium carbide furnace. High quality electrode paste must have continuous stability, suitable fluidity, good thermal conductivity, high oxidation resistance and excellent conductivity;

　　At the same time, the electrode should be able to withstand high temperature, with small coefficient of thermal expansion, small porosity and low resistivity to reduce power loss; It should also have high mechanical strength, so as not to break the electrode due to the influence of mechanical and electrical loads and the slight impact caused by the collapse of furnace charge.

Contact info:

Email: carbongraphiteproduct@gmail.com

whatsapp: +8614738833543


Henan Rongxin Carbon Group

　　Rongxing Group is China’s leading supplier dedicated to providing its customers with the quick quotes, superior quality products, competitive prices and fastest possible deliveries of carbon metallurgical materials and solutions.

　　Its main products are graphite electrode，electrode paste, calcined petroleum coke, and refractory. The range of product line covers carbon materials, graphite materials, refractory and water treatment materials. The annual production capacity of graphite electrode, electrode paste, calcined coke and refractory reaches 50,000 tons, 200,000 tons, 250,000 tons and 20,000 tons respectively. The company’s corporate headquarters is currently located in the Zhengzhou.

　　As an experienced supplier, we now offer everything from RP, HP to UHP graphite electrode and trapezodial, oval, cylinder electrode paste in the world. Our products meet and exceed the challenges of thousands of applications, and continue to be innovated.


Alibaba ：Graphite electrode

Alibaba ：Electrode paste

Comments

Post a Comment

Popular posts from this blog

Matters needing attention when filling electrode paste

Image
 The following points should be paid attention to when installing the electrode paste airtight paste: 1. Do not allow debris to enter the electrode 2. Proper paste height 3. Work harder 4. Appropriate temperature 5. Prevent overhang Before filling, the electrode paste should be broken, generally broken into small pieces of 80~100mm, so that the electrode paste block can pass between the two ribs smoothly. If the particle size is too large, the electrode paste suspension failure is likely to occur; if the particle size is too small, it is easy to cause the phenomenon of spraying. Use a forklift truck or special tools to transport the electrode paste to the calcium carbide furnace, and use an electric hoist to hoist the electrode paste into the electrode bucket. Pay attention to the safety of hoisting during loading. When installing electrode paste, be careful not to scatter the electrode paste on the equipment outside the electrode barrel, so as to avoid accidents of electric fire. ...
Read more

Storage and management of electrode paste

Image
 As the self-baking electrode of submerged electric furnace, electrode paste has been widely used in the smelting of various products of submerged electric furnace. Although the cost of electrode paste in the production of calcium carbide, ferroalloy and other products is relatively low, the quality of the electrode paste and the firing of the electrode directly affect the stability of the operation of the submerged electric furnace. Due to the various types of submerged electric furnaces, the different furnace conditions, and the increasing capacity of electric furnaces, when the quality index of the electrode paste meets the requirements, the roasting quality plays a decisive factor, which requires us to focus on calcium carbide, ferroalloys, etc. The actual production of the product starts with the management of the electrode paste, strictly implements the operating procedures, regularly and quantitatively lowering the electrodes, and maintains the normal and stable operating pa...
Read more