Mechanical strength of electrode paste for submerged arc furnace

 The height of the electrode paste refers to the height from the upper end of the electrode clip to the top of the electrode paste. If the electrode paste is too high, the coarse and fine particles in the electrode paste are prone to stratification, or the electrode cylinder will be swollen due to too much pressure of the paste column. If the electrode paste column is too low, the pressure of the paste column is too small and the filling is poor, and it is difficult to obtain Dense electrodes. The electrode paste is consumed too quickly. The proper height of the electrode paste column is beneficial to improve the quality of electrode firing and reduce consumption.

Electrode paste is the conductive electrode of various submerged electric furnaces, and it is an indispensable product in industrial production. We at Rongxin Carbon have read many domestic and foreign materials, but we have not found any materials that specifically discuss the mechanical strength of electrode pastes. In order to promote the improvement of the quality of electrode pastes, and for the manufacturers of electrode pastes to master the performance of electrode pastes, we are Rongxin Carbon. The mechanical strength of electrode paste is specially discussed.

In the national standard of electrode paste, there is no quality index of mechanical strength of electrode paste, only the quality index of compressive strength of electrode paste. Mechanical strength itself includes compressive strength, and has certain relevance. As a national standard, it may not be able to All things are put into quality standards, but the national standard is the standard more than ten years ago. The electrode paste industry has developed rapidly over the past ten years. When our factory specifically discusses the strength of the electrode paste, we have to do a more comprehensive Explore.

The mechanical strength of the electrode paste includes compressive strength, flexural strength and tensile strength. The mechanical strength of carbon products is anisotropic, that is, the composition of the raw material particles of carbon products is different in the horizontal and vertical directions. Due to the production method of the electrode paste, we will not discuss the anisotropy of the electrode paste's mechanical strength here. The composition of the raw materials of the electrode paste, that is, different raw materials, the particle size and ratio of the raw materials, the thickness and ratio of the powder, and the content of coal pitch all have an impact on the mechanical strength of the electrode paste

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more