The use of electrode paste in ferroalloy electric furnace

At present, when domestic submerged arc furnaces are used to produce ferrosilicon, manganese and chromium ferroalloys, standard electrode pastes are usually used. With the widespread use of large-capacity submerged arc furnaces and closed electric furnaces, the number of large-scale electric furnaces has continued to increase; and the output of ferroalloys has increased significantly, many silico-manganese alloy submerged arc furnaces are gradually switching to closed electrode pastes. In order to ensure that the self-baking electrode can be sintered early. There are also some silicomanganese alloy manufacturers, which are electric furnace nickel-iron manufacturers. According to the needs of our factory, they usually prefer to choose high-standard sealed electrode paste that is more suitable for them. Among them, the main point is that the high-standard electrode paste is easy to bake, has stable performance and quality, and can ensure the baking quality of the electrode, so as to prevent the occurrence of soft short, hard broken, and U-turn events. A nickel-iron alloy plant in the Inner Mongolia Autonomous Region has been in operation for 7 months and has 22 accidents of paste leakage and hard breakage, resulting in 48 severely short electrodes. The main reason is that the electrode paste is selected improperly and the electrode paste baking speed of the electrode is too slow. Later, after the above-mentioned ferronickel plant switched to Gongyi Rongxin carbon high-standard airtight paste, only one hard-breaking accident of non-electrode paste quality occurred in 8 months. Users are satisfied with the quality of Rongxin Carbon's electrode paste. The core of the long-term stable operation of ferroalloys is whether the electrode column can work normally. People often regard the electrode as the "heart" of the submerged arc furnace. The central issue is the quality of electrode sintering to ensure long-term stable operation and fewer accidents. In fact, in the production cost of ferroalloys, the cost factor of electrode paste consumption only accounts for a very small share. The primary responsibility of the operators and organizers of production is to ensure the normal operation of production equipment. Once the electrode of the electric furnace has an accident, the loss will be huge and catastrophic, and it is almost impossible to make up.

Contact info:

Email: carbongraphiteproduct@gmail.com

whatsapp: +8614738833543


Henan Rongxin Carbon Group

　　Rongxing Group is China’s leading supplier dedicated to providing its customers with the quick quotes, superior quality products, competitive prices and fastest possible deliveries of carbon metallurgical materials and solutions.

　　Its main products are graphite electrode，electrode paste, calcined petroleum coke, and refractory. The range of product line covers carbon materials, graphite materials, refractory and water treatment materials. The annual production capacity of graphite electrode, electrode paste, calcined coke and refractory reaches 50,000 tons, 200,000 tons, 250,000 tons and 20,000 tons respectively. The company’s corporate headquarters is currently located in the Zhengzhou.

　　As an experienced supplier, we now offer everything from RP, HP to UHP graphite electrode and trapezodial, oval, cylinder electrode paste in the world. Our products meet and exceed the challenges of thousands of applications, and continue to be innovated.


Alibaba ：Graphite electrode

Alibaba ：Electrode paste

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more