Characteristics of Cold ramming paste

 Classification and properties of cathode pastes for aluminum electrolysis

　　The function of aluminum reduction cell paste is to fill the space between the single cathode carbon blocks laid on the bottom of the cell and between the cathode carbon blocks and the side carbon blocks. After roasting, the bottom and side of the cell form a complete sealed cell body, so as to avoid the leakage of electrolyte and aluminum liquid during roasting and operation; At the same time, as a part of the cell, it can balance the heat generated in the electrolysis process with the heat lost at the side, so as to improve the electrical efficiency and prolong the service life.

Characteristics of Cold ramming paste

　　At present, the electrolytic cell capacity has entered the super large era of 400ka-600ka. The annual production capacity of a single series is more than 400000 tons. The investment is huge, and the requirements for furnace building, operation and management of the electrolytic cell are higher. The paste is the fatal material of the electrolytic cell, and its performance directly affects the success of the electrolytic cell startup and the length of its life. According to the design requirements or the characteristics of cathode carbon block, the correct selection of paste is the basic requirement of aluminum reduction cell furnace building technology. According to the product standard of cathode paste for aluminum electrolysis (ys/t65-2007) issued in 2007 and the revised exposure draft issued in 2011, cathode pastes for aluminum electrolysis are divided into three categories and 11 brands according to their physical and chemical properties, applicable parts of products and construction temperature. See Table 1 for the classification and use of various pastes.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more