Analyze the advantages of pretreatment agent

 　　The pretreatment agent is a kind of casting additive added during the melting process of molten iron. It contains a certain amount of deoxidizing elements and composite elements, which can provide more and stable crystal nuclei for the precipitation and growth of graphite through the treatment of molten iron before tapping or during tapping.

　　● solve the negative impact of high-temperature standing of molten iron in electric furnace, enhance the graphite nucleation ability and increase the graphite core, effectively solve the incubation recession, promote and stabilize the nucleation, alleviate the ablation of graphite core during long-time high-temperature standing of molten iron, effectively compensate the lost graphite core, and thus improve the overall metallurgical quality of molten iron.

　　● it has strong deoxidizing effect, purifies molten iron, and reduces slag inclusion and pore defects;

　　● improve the morphology and distribution of graphite, reduce the white tendency and improve the cutting performance of castings.

　　● increase the fluidity, reduce the sensitivity of casting wall thickness, stabilize the composition of molten iron and compact the structure, and reduce shrinkage porosity defects.

　　● reduce the undercooled graphite in gray cast iron, promote the generation of A-type graphite, enhance the control of graphite morphology and reduce the tendency of white cast iron, so as to optimize the mechanical properties of the casting.

　　● for nodular cast iron, it is a powerful deoxidizer. Adding it in the production of nodular cast iron can increase the number of graphite balls, improve the spheroidization rate, make the graphite balls more round and fine, and reduce the amount of spheroidizing agent.

　　● eliminate the oxidation factors of molten iron, reduce the oxidation of furnace lining, and prolong the service life of furnace lining by 10% - 40%.

　　● reduce rusted furnace charge and alloy oxide to reduce the cost of molten iron.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more