Electrode paste is the preferred conductive material

 　　With the continuous improvement of metallurgical technology, the application field of metallurgical products is expanding. At present, China’s basic industry is developing rapidly, especially the development of electrode paste.

　　Electrode paste is a conductive material used for electric furnace equipment such as ferroalloy furnace and carbide furnace. It can withstand high temperature and has a small coefficient of thermal expansion. And has a relatively small resistance coefficient so that the loss of electric energy can be reduced. It has a small porosity so that the electrode in the heated state can be oxidized slowly. With high mechanical strength, the electrode will not be broken due to the influence of mechanical and electrical loads.

Electrode paste is the preferred conductive material

　　The current is input into the furnace through the electrode to generate an arc for smelting. The electrode plays a very important role in the whole electric furnace. Without it, the electric furnace cannot produce its role. To make the electrode work normally under the temperature generated by the arc, it needs to have a high degree of oxidation resistance and conductivity. This electrode can only be made of carbon material and has this excellent property. Because the carbon electrode can withstand arc temperatures up to 3500. D egree.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more