Medium crushing batching equipment for electrode paste production

 Electrode paste is a relatively simple product in the production of carbon products, but their production links are basically the same from the calcination of raw materials to crushing, screening and the front-end of ingredients. Moreover, it is very important to directly affect the output of finished products, the cost of production, the final quality of products, the scale of capital construction, the investment of capital construction and the cycle of capital construction.

　　In order to obtain good products and control the performance of products, regular carbon production enterprises with scale must first break and screen the calcined carbon raw materials, store the materials separately according to various particle sizes, then design the formula according to the use, variety and specification of the products, and strictly measure the ingredients according to the formula. In order to obtain good products, ensure the good performance of products and ensure the use of products. This is the main task of the medium crushing batching process. This process mainly has several forms in terms of the layout of process equipment.

　　1、 Planar layout: all intermediate crushing equipment, screening equipment, grinding equipment and storage bin are in one plane. It is basically manual operation, with poor environment and high labor intensity. This arrangement is mainly for small enterprises and manufacturers with small output. The process is simple and the investment is small. It is not suitable for large-scale production requirements and environmental protection requirements. It belongs to the extensive production mode. It is characterized by small investment, high labor intensity, high pollution and low efficiency. In today's people-oriented and environment-friendly social environment, small factories should also improve and eliminate the arrangement of medium crushing ingredients.

　　2、 Three dimensional arrangement: this arrangement mainly uses the gravity of materials for process arrangement. First, after the materials are crushed in the crusher as required, they are lifted to a certain height by the material lifting equipment, and then gravity is used to enter the bin, and then the screening equipment is used to screen and classify the materials, and store them separately. Enter the grinding equipment for grinding and storage. Continue to use gravity to carry out batching according to the process formula, complete the task of medium crushing batching process, and achieve the purpose of preparing for the next process.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more