What is the main component of electrode paste

 The main components of electrode paste are solid carbon materials and binders. Solid carbon materials include electric calcined coal, petroleum coke, etc. the binder is generally asphalt

Comments

Post a Comment

Popular posts from this blog

Storage and management of electrode paste

Image
 As the self-baking electrode of submerged electric furnace, electrode paste has been widely used in the smelting of various products of submerged electric furnace. Although the cost of electrode paste in the production of calcium carbide, ferroalloy and other products is relatively low, the quality of the electrode paste and the firing of the electrode directly affect the stability of the operation of the submerged electric furnace. Due to the various types of submerged electric furnaces, the different furnace conditions, and the increasing capacity of electric furnaces, when the quality index of the electrode paste meets the requirements, the roasting quality plays a decisive factor, which requires us to focus on calcium carbide, ferroalloys, etc. The actual production of the product starts with the management of the electrode paste, strictly implements the operating procedures, regularly and quantitatively lowering the electrodes, and maintains the normal and stable operating pa...
Read more

The installation of cathode carbon block 1

Image
 　　The cathode carbon block and cathode steel bar are closely combined into one process. Cathode carbon block is an important part of aluminum reduction cell, which is directly used as cathode lining and conductive material. The cathode circuit of aluminum reduction cell is formed by connecting cathode steel bar and cathode bus. The assembly process of cathode carbon block and cathode steel bar should reduce the contact resistance between them as much as possible. 　　There are three ways to assemble cathode carbon block and cathode steel bar( 1) Cast iron casting method. The gap between them is cast with molten phosphorus pig iron, which is condensed to form a whole( 2) In the carbon paste tamping method, the gap on both sides of the steel rod is filled with cathode paste called steel rod paste, and tamped and compacted with pneumatic tools( 3) Bonding method. The cathode carbon block and steel bar are bonded together with carbon glue or adhesive. Graphite or metal pow...
Read more

Measures to prevent electrode paste from breaking

Image
 The measures to prevent electrode soft break during the use of electrode paste can be divided into the following points: 1. Strictly control and master the length of the working end of the electrode, reasonably control the pressing time, so that the pressing speed is compatible with the sintering speed. When the material surface is processed every 24 hours, Observe the baking condition of the electrode so as to control the hardness and softness of the electrode (if it is found that the surface of the laid down electrode is gray white, dark but not red or slightly red, it indicates that the electrode is well roasted; if the surface of the laid down electrode is red, it indicates that the electrode has been burnt; if the surface is black, it indicates that the electrode is not baked enough. You can also use round steel to poke the electrode. If it is hard, it can bounce back to indicate that the electrode has been burnt; if it is elastic, it indicates that it is normal; if it is sof...
Read more