Graphite chemical carbon block

 With high quality anthracite, coke, graphite as raw materials made of carbon block. Used as cathode of aluminium electrolytic cell. It is built at the bottom of the electrolytic cell, also known as the bottom carbon block. The cathode carbon block plays a dual role of conducting electricity and forming the inner lining of the electrolytic cell. The cathode carbon block is required to have high temperature resistance in aluminum electrolysis production, resistant to molten salt erosion, good electrical and thermal conductivity, high mechanical strength, good thermal shock resistance and strong corrosion resistance of sodium, which is conducive to energy saving and tank life improvement in the production of aluminum electrolysis.

According to the quality requirements of the products, the raw materials selected and the technological conditions used, the cathode carbon blocks in China are basically divided into three categories: ordinary cathode carbon blocks, semi-graphitic carbon blocks and graphitic carbon blocks. Anthracite calcined at 1250 ~ 1350℃ is used as the main raw material for common cathode carbon block. The half graphite carbon block is divided into two kinds according to the different production process.

Another kind of coke with more easy graphitization as aggregate, raw products after roasting and then into graphitization furnace at 1800 ~ 2000℃ temperature for heat treatment, this kind of carbon block is called half graphite (chemical) carbon block.

The former has higher strength and hardness, while the latter has better conductive property and overall effect. Graphite carbon block, with easy graphitization coke as raw material, graphitization treatment temperature should reach about 2500℃.The difference between half graphitic carbon block and graphite carbon block lies in the degree of orderly arrangement of the crystal lattice of the products, that is, the degree of graphitization is different. The degree of graphitization can be indicated by the resistivity of the product. The lattice of the graphite carbon block is almost in the state of ordered arrangement, and the resistivity is less than 15μΩm;The degree of graphitization of semi-graphitized carbon blocks is low or only partly graphitized, and the resistivity is 15 ~ 45μΩM.The maximum heat treatment temperature of half graphitic carbon block is about 2000℃, and the graphitic treatment temperature of graphitic carbon block is 2500 ~ 2800℃.

Common cathode carbon block, resistivity 50 ~ 60μΩM.Graphitized cathode is a conductive material used for cathode of aluminum electrolytic cell, which represents the development direction of electrolytic aluminum industry. With the technological progress and development of electrolytic aluminum industry, the electrolytic cell is developing towards a large capacity of more than 300kVA, and the requirements for cathode materials are higher. The main advantages of graphitized cathode are to strengthen current, improve current efficiency, achieve the purpose of increasing production and saving energy, and make the electrolytic cell run stably. The larger the cell type is, the more obvious the operation stability effect is, and the more obvious the improvement of current efficiency is. The unit capacity of aluminum electrolytic cell using graphitized cathode is increased by 10-15%, and the power saving per ton of aluminum is more than 600kWh.Graphite cathode aluminum electrolytic cell is one of the priority materials in the electrolytic aluminum industry due to the obvious effect of energy saving, consumption reduction and emission reduction.


Contact info:

Email: carbongraphiteproduct@gmail.com

whatsapp: +8614738833543


Henan Rongxin Carbon Group

　　Rongxing Group is China’s leading supplier dedicated to providing its customers with the quick quotes, superior quality products, competitive prices and fastest possible deliveries of carbon metallurgical materials and solutions.

　　Its main products are graphite electrode，electrode paste, calcined petroleum coke, and refractory. The range of product line covers carbon materials, graphite materials, refractory and water treatment materials. The annual production capacity of graphite electrode, electrode paste, calcined coke and refractory reaches 50,000 tons, 200,000 tons, 250,000 tons and 20,000 tons respectively. The company’s corporate headquarters is currently located in the Zhengzhou.

　　As an experienced supplier, we now offer everything from RP, HP to UHP graphite electrode and trapezodial, oval, cylinder electrode paste in the world. Our products meet and exceed the challenges of thousands of applications, and continue to be innovated.


Alibaba ：Graphite electrode

Alibaba ：Electrode paste

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more