Electrode paste in the process of smelting silicon aluminum and iron

It is more difficult to smelt silicon-aluminum-ferroalloy in a closed electrode paste submerged arc furnace, and only a good start can make the future smelting road smoother. Therefore, adequate preparation, high-quality raw materials, careful operation, and excellent technology are all necessary guarantees for opening the furnace. The ferrosilicon-aluminum alloy produced by the submerged thermal method, as a steelmaking deoxidizer, has been gradually recognized by major steel mills and more and more manufacturers because of its good deoxidizing effect and can effectively reduce steelmaking costs. At present, the types of furnaces for the production of ferrosilicon-aluminum alloys are mostly concentrated in the range of 1800KVa to 6300kVA. Its production capacity accounts for more than 80% of all submerged arc furnaces producing silicon-aluminum-ferroalloys, and its smelting technology in small furnaces is also becoming more mature. However, the rise in electricity prices and the pressure of industrial policies have prompted the production of silicon-aluminum-ferroalloy furnaces to gradually become larger. Everyone knows that more than 50% of the production cost of ferroalloys is electricity consumption, while the electricity consumption per ton of large electric furnaces is significantly reduced. As one of the more difficult to smelt ferroalloys, silicon-aluminum-ferroalloys are used for smelting the electrode paste closed paste submerged arc furnace each time the electric furnace capacity increases is a major technological leap. This article summarizes the problems that should be paid attention to in the process of smelting ferro-silicon-aluminum alloy on the 16.5WVA electrode paste submerged arc furnace, in order to provide some references for the smelting of ferro-silicon-aluminum alloy. Device parameters (1). Furnace type: 16.5MVA submerged arc furnace (2). Transformers: Three 5500KVA single-phase smelting transformers are distributed in triangles. (3). Diameter of polar center circle: adjustable from 2700mm-3000mm. (4). Electrode diameter: 1150mm. (5) Hearth diameter: 6000mm. (6) Furnace depth: 2400mm. (7) Grip system: corrugated pressure ring gripper.

Contact info:

Email: carbongraphiteproduct@gmail.com

whatsapp: +8614738833543


Henan Rongxin Carbon Group

　　Rongxing Group is China’s leading supplier dedicated to providing its customers with the quick quotes, superior quality products, competitive prices and fastest possible deliveries of carbon metallurgical materials and solutions.

　　Its main products are graphite electrode，electrode paste, calcined petroleum coke, and refractory. The range of product line covers carbon materials, graphite materials, refractory and water treatment materials. The annual production capacity of graphite electrode, electrode paste, calcined coke and refractory reaches 50,000 tons, 200,000 tons, 250,000 tons and 20,000 tons respectively. The company’s corporate headquarters is currently located in the Zhengzhou.

　　As an experienced supplier, we now offer everything from RP, HP to UHP graphite electrode and trapezodial, oval, cylinder electrode paste in the world. Our products meet and exceed the challenges of thousands of applications, and continue to be innovated.


Alibaba ：Graphite electrode

Alibaba ：Electrode paste

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more