Graphite electrode production process Rongxin group

 1. Calcining. Both petroleum coke and pitch coke need to be calcined, and the calcining temperature should reach 1350. C, to fully remove the volatile matter contained in the carbonaceous raw materials, and improve the true density, mechanical strength, and conductivity of the coke.

2. Crushing, screening and batching. The calcined carbonaceous raw material is crushed and sieved into aggregate particles of specified size, part of the coke is ground into fine powder, and then weighed according to the formula to form a dry mixture of various particles.

uhp graphite electrode sales

3. Kneading. Under the heating state, the quantitative dry mixture of various particles and the quantitative binder are stirred and mixed and kneaded to form a plastic paste.

4. Forming. Under the action of external pressure or high-frequency vibration, the paste is pressed into a green electrode with a certain shape and higher density.

5. Roasting. Put the green electrode in a special roasting furnace, and use metallurgical coke powder to fill and cover the green electrode, thereby making a roasted carbon electrode.

6. Impregnation. In order to improve the density and mechanical strength of the electrode product, the roasted electrode is put into the high-voltage equipment, the liquid impregnant pitch is pressed into the pores of the electrode, and the second roasting should be carried out after the impregnation.

uhp 550 graphite electrode

7. Graphitization. Put the roasted carbon electrode into the graphitization furnace, cover the insulation material, and adopt the heating method that directly energizes to generate high temperature, in the range of 2200~3000. Under the high temperature of C, the carbon electrode is transformed into a graphite electrode with graphite crystalline structure.

8. Mechanical processing. According to the application requirements, the graphite electrode blanks are surface-turned, flat end faces and screw holes for connection are processed, and joints for connection are processed.

9. After the graphite electrode crystal has passed the inspection, it should be packaged appropriately and sent to the customer.

Location: FQPG+3P Inavauni, 巴布亚新几内亚

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more