Oven method of submerged arc furnace before electrode paste airtight paste

 The so-called oven is an operation in which the furnace lining and electrodes are gradually adapted to the feeding smelting by heating, and its main purpose is to dry the furnace lining and baking the electrodes. The quality of the oven will not only affect the service life of the furnace lining, but also directly affect whether the electric furnace can be put into production smoothly. Therefore, the furnace system should be formulated in detail in the furnace opening plan and strictly implemented.

Coke oven

In the first stage of the oven process, there are three methods of wood baking, oil baking and coke baking. This article focuses on the focus on the focus baking. As the name implies, coke baking is a method of oven using the combustion heat of coke. Large metallurgical coke with less ash content should be used to make fuel (particle size> 150 mm). During the baking of the electrode, the coke should be burned close to the electrode. Add it in time. In order to help the coke burn, you can use air blowing to support combustion.

No matter which type of oven is used, the purpose is to bake the electrode, so that the electrode has a certain ability to withstand current, and prepares for the next electric oven. Therefore, the sintered state of the electrode and the height of the electrode paste should be frequently observed to determine whether the conditions of the electric oven are available in time. In the previous process, the coke oven time is longer (10000KVA electric furnace 72-96 hours). In production, according to The actual situation can be appropriately shortened, thereby reducing the waste of coke.

Electric oven

The purpose of the electric oven is the same as that of the coke oven, and its main purpose is still to increase the furnace temperature and roast the electrodes so that the electric furnace has the conditions for positive production. The power of the electric oven is determined by the capacity of the electric oven and the material of the furnace lining. A low-voltage oven should be used for the electric oven to try to ensure the stability of the arc and less moving electrodes to keep the load of the three-phase electrodes uniform. It should be strictly implemented in accordance with the power supply system of the electric oven. The electric oven determines the speed of the electric furnace temperature increase, the electrode sintering speed and the sintering quality, so the power supply system should be scientifically based on the characteristics of the electrode sintering.


Contact info:

Email: carbongraphiteproduct@gmail.com

whatsapp: +8614738833543


Henan Rongxin Carbon Group

　　Rongxing Group is China’s leading supplier dedicated to providing its customers with the quick quotes, superior quality products, competitive prices and fastest possible deliveries of carbon metallurgical materials and solutions.

　　Its main products are graphite electrode，electrode paste, calcined petroleum coke, and refractory. The range of product line covers carbon materials, graphite materials, refractory and water treatment materials. The annual production capacity of graphite electrode, electrode paste, calcined coke and refractory reaches 50,000 tons, 200,000 tons, 250,000 tons and 20,000 tons respectively. The company’s corporate headquarters is currently located in the Zhengzhou.

　　As an experienced supplier, we now offer everything from RP, HP to UHP graphite electrode and trapezodial, oval, cylinder electrode paste in the world. Our products meet and exceed the challenges of thousands of applications, and continue to be innovated.


Alibaba ：Graphite electrode

Alibaba ：Electrode paste

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more