Crushing process of electrode paste ingredients

 This process mainly has several forms in terms of the layout of process equipment.

A flat layout: all the crushing equipment, screening equipment, milling equipment, and storage bins are all on the same plane. It is basically manual operation, the environment is very poor, and the labor intensity is high. This arrangement method is mainly used by some small enterprises and manufacturers with small output. The process is simple and the investment is small. Not suitable for large-scale production requirements and environmental protection requirements. Belongs to extensive production methods. It is characterized by low investment, high labor intensity, high pollution, and low efficiency. In today's social environment where people-oriented, safety and environmental protection are first, small factories should also improve the method of eliminating this kind of medium-crushed ingredients.

graphite electrode,
cold ramming paste,
semi coke,
electrode paste,
graphite carbon block,
smelt material,

Two-dimensional layout: This layout mainly uses the gravity of the material for process layout. First, the materials are fed into the crusher to be crushed as required, then the materials are lifted to a certain height by the material lifting equipment, and then enter the silo by gravity, enter the screening equipment for material screening, classification, and storage. Enter the milling equipment for milling and storage. Continue to use gravity to carry out ingredients according to the process formula, complete the task of the medium-crushing ingredient process, and achieve the purpose of preparing for the next process. The usual batching silos are equipped with 9-12. The design institutes generally design them in a line-shaped arrangement, and use a mobile measuring trolley to move the measuring and receiving materials, or each silo is equipped with a horizontal conveying device to transport to the batching measuring hopper.

Location: 7HC9GH6R+M3

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more