Carburizing agent directly affects the effect of carburizing

 　　What is the carburizing agent: it is a product of black or gray particles or lumps of coke with high carbon content, which is added to the metal smelting furnace to improve the carbon content in the molten iron. On the one hand, it can reduce the oxygen content in the molten iron, and on the other hand, it is more important to improve the mechanical properties of the smelting metal or castings. Poor quality of carburizing agent will bring great losses to the enterprise, with slow absorption, low absorption rate and increased cost; Cause unnecessary waste, and other harmful elements will affect product quality and cause losses. According to the raw materials and production process of the carburizing agent, the price also varies greatly.

　　How to choose raw materials to produce professional carburizing agents? The content of fixed carbon, sulfur, nitrogen and ash in the general carburizing agent will directly affect the quality of the carburizing agent and the use effect of the carburizing agent.

　　We generally hope that the fixed carbon content of the carburizing agent is higher and the ash content is lower. High ash content will not only increase the operation time and labor cost, but also reduce the carburizing efficiency; It is hoped that the content of sulfur and nitrogen in the carburizing agent will be lower, because nitrogen porosity will be generated when the nitrogen content is too high. Nitrogen porosity is one of the common defects in the casting production process, and sulfur is usually a harmful element, reducing the ductility and toughness of steel. Therefore, the nitrogen content in the used carburizing agent is generally required to be less than 0.02% and the sulfur content is less than 0.055%.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more