Manufacturing process of electrode paste - Rongxin Group

 Electrode paste manufacturing includes such production processes as medium crushing and screening, grinding, batching, kneading and molding cooling.

① Medium crushing screening
The project is equipped with a medium crushing and screening system for calcined anthracite. The calcined anthracite is fed by electromagnetic vibrating feeder, and then sent to a double-layer horizontal vibrating screen and a single-layer horizontal vibrating screen by belt conveyor and bucket elevator. After screening, the materials with particle size greater than 10mm are returned to the intermediate bin, and then fed by electromagnetic vibrating feeder to the double roller crusher. Re sieving after medium crushing. 10-6mm and 6-3mm grain size materials can be directly into the corresponding batching bin, or can be returned to the double roller crusher to be finely crushed to less than 3mm, which is convenient for flexible production adjustment.


There are 3 kinds of particle size materials, i.e. 10-6mm, 6-3mm, 3-0mm. In addition to the materials of 6-3mm and 3-0mm directly entering the batching bin, some materials are sent to the pulverizer for grinding into powder.
The raw and crushed materials are directly transported to the raw and crushed material bin for use by belt conveyor and bucket elevator after being crushed to the particle size below 20mm in two stages in the treatment section.
② Grinding
In order to ensure the compactness of the electrode paste product, a certain proportion of powder (about 45%) needs to be added to fill the gap between the granules during the production of the electrode paste. The main source of powder is the calcined anthracite dust, calcined petroleum coke and coke powder collected by the dust collection system, which are crushed into powder by the pulverizer.
Four 6r4427 pendulum mills [or Raymond mills] are used for grinding.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more