The electrode works normally at the temperature generated by the arc

 These control indicators have not controlled the occurrence of electrode paste accidents in the production practice of small and medium-sized calcium carbide furnaces in the past decades. At present, the diameter of the electrode of the large closed calcium carbide furnace to be developed is relatively large, and the working length is relatively long. The tensile force generated by its own weight is larger, which requires high mechanical strength, and it also needs to re regulate the new compressive strength control index; Now energy conservation has become a national policy again. The national standard for energy consumption indicators of large closed calcium carbide furnaces is quite strict, so the electrode paste should have a relatively small resistance coefficient.

The electrode paste is a conductive material used for ferroalloy furnaces, calcium carbide furnaces and other electric furnace equipment. It can withstand high temperature, and the thermal expansion coefficient of electrode paste is small. It has a relatively small resistance coefficient, which can reduce the loss of electric energy. With small porosity, the heated electrode can be oxidized slowly. With high mechanical strength, the electrode will not break due to the influence of mechanical and electrical loads. The current is smelted by the electric arc generated by the electrode input into the furnace. The electrode plays a very important role in the whole electric furnace.

Without it, the electric furnace cannot play a role. In order to make the electrode work normally under the temperature generated by the arc, the electrode paste needs to have high oxidation resistance and conductivity. A kind of electrode paste baking temperature tester includes: temperature acquisition module, amplification module, a / D conversion module, single chip microcomputer and voice broadcasting module connected in turn. Further, the temperature acquisition module is a nickel chromium nickel silicon thermocouple. Further, the amplifying module is a temperature transmitter of the heating resistance. Further, it also includes an LED display module connected with the single chip microcomputer.

Comments

Post a Comment

Popular posts from this blog

Study on impurities in high purity flake graphite

Image
 　　For the analysis of trace impurities in high-purity flake graphite, the sample is usually pre ashed or wet digested to remove carbon, the ash is dissolved with acid, and then the impurity content in the solution is determined. The ashing method does not need to use ultra pure acid to dissolve the ash, thus avoiding the risk of introducing the elements to be measured, so it is used more. It is also very difficult to detect the ash content of high-purity flake graphite, because the enriched ash needs to be burned at high temperature, and it is difficult to separate the ash from the sample boat at high temperature, which makes it impossible to accurately determine the composition and content of impurities. 　　The existing methods all take advantage of the characteristic that the platinum crucible does not react with acid, use the platinum crucible to burn the high-purity flake graphite to enrich ash, and then directly heat the sample in the crucible with acid to dissolve th
Read more

General technical index requirements for electrode paste

Image
 Electrode occupies an important position in submerged arc furnace. The working conditions of the electrode are bad, the current passing through is high, the temperature difference between the two ends is large, and the production is affected by the impact of mechanical, electrical and charge collapse... Mechanical strength, higher electrical resistivity, better thermal shock resistance, oxidation resistance and smaller thermal expansion coefficient. Generally speaking, the quality of electrode paste is controlled by the following five indicators: 1. Ash: Ash is the residue of electrode paste when it is burnt to constant weight at 850℃-870℃. It belongs to inorganic minerals. It has high ash resistivity, poor strength, high power consumption, and large electrode consumption. In the event of a hard breaking accident, the ash content is a very important indicator, and the lower the better. 2. Volatile matter: Volatile matter refers to the mass loss of electrode paste under the condition o
Read more

Performance characteristics of anthracite electrode paste

 Anthracite is the main raw material of electrode paste. The performance of anthracite is related to the performance of electrode paste. Therefore, it is necessary to understand and discuss the performance of anthracite to ensure the quality of electrode paste. Anthracite coal in China is mainly distributed in Shanxi, Ningxia and Guizhou. Shanxi is the origin of anthracite, which is mainly produced in Yangquan and Jincheng. Anthracite is an indispensable raw material for carbon industry. It is mainly used in semi graphite cathode carbon block, electric furnace carbon block, blast furnace carbon block, carbon electrode and various pastes. Studying and discussing various properties of anthracite is very beneficial to improve the quality of carbon products.
Read more